Eco SNT

Handled Liquids: 

Eco SNT type pumps are suitable for clean or slightly contaminated liquids with low viscosity.

Technical Data: 
Minimum Efficiency Index MEI ≥ 0.4 and MEI ≥ 0.7 (EU 547/2012)
Capacity up to 600 m³/h
Head up to 100 m
Speed up to 2900 rpm
Operating Temperature -10 °C up to 140 °C *
Casing Pressure (Pmax)* 10 bar (16 bar) *
(Pmax : Suction Pressure + Shut off Head)

(*) The material of pump differs according to the type of pumped liquid , operating temperature and pressure. Contact our company for detailed information.
Design Features: 
  • Horizontal , radially split volute casing type , single stage, end suction centrifugal pump with enclosed impeller.
  • Dimensionally complies with EN 733.
  • In addition to 24 basic sizes conforming with EN 733, there are 8 additional sizes. Dimensions of additional sizes may differ from other suppliers.
  • The suction and discharge flanges are conforming to EN 1092-2 / PN 16.
  • Due to the back-pull-out design the complete bearing assembly including impeller and casing cover can be dismantled without removing the volute casing from the pipe system.
  • All impellers are balanced statically and dynamically according to ISO 1940 class 6.3.
  • Axial thrust is balanced by wear ring / balancing holes system.
Shaft Seal: 
  • In standard production soft packed stuffing boxes are used.
  • Depending on customer requirement mechanical seals are available. In this case, pump shaft is always stainless steel.
Rotation: 

Direction of rotation is clockwise viewed from driver end.

Product Designation: 
Eco SNT 100-250 XXX
Pump type Eco SNT
Discharge Nozzle (DN-mm) 100
Nominal Impeller Diameter (mm) 250
Special Application XXX
Technical Drawings: 
Applications: 
Agricultural İrrigation and Drainage
Building Systems
Chemical Industries
Food and Beverage Industries
Heating Cooling Conditioning
Iron and Steel Industries
Marine
Oil Industries
Power Plants
Water Supply Treatment and Pressurizing