SNL

Handled Liquids: 

SNL type pumps are suitable for non-aggressive, non-explosive, clean or slightly contaminated liquids with low viscosity

Technical Data: 
Suction Flange DN 40 up to 200 mm
Discharge Nozzle DN 40 .... DN 200 mm
Capacity up to 500 m³/h
Head up to 95 m
Speed up to 2900 rpm
Motor Rating up to 55 kW +
Operating Temperature -10 °C up to 110 °C
Casing Pressure (Pmax)* 16 Bar (Group A and B)*
10 Bar (Group C) *
(Pmax : Suction Pressure + Shut off Head)
(*) The material of pump differs according to the type of pumped liquid , operating temperature and pressure. Contact our company for detailed information.
Design Features: 
  • Close-coupled, volute casing, single stage, in-line centrifugal pump with closed impeller.
  • Suction and discharge flanges are conforming to EN 1092 - 2 / PN 16
  • SNL type pumps are direct coupled with NORM electric motors comply with the VDI standards and IEC frame sizes.
  • Due to back pull-out design the motor, motor pedestal, stuffing box cover and impeller can be dismantled without removing the volute casing from the pipe system.
  • Axial thrust is balanced by wear ring/balancing holes system.
Shaft Seal: 

Single mechanical seal, flushed by pumped liquid, uncooled and unbalanced.

Rotation: 

Direction of rotation is clockwise viewed from driver.

Product Designation: 
SNL 100-250
Pump Type SNL
Suction and Discharge Nozzles (DN-mm) 100
Nominal Impeller Diameter (mm) 250
Technical Drawings: 
Applications: 
Power Plants
Oil Industries
Water Supply Treatment and Pressurizing
Marine
Chemical Industries
Building Systems
Fire Fighting
Food and Beverage Industries
Iron and Steel Industries
Heating Cooling Conditioning
Agricultural İrrigation and Drainage