SCP

Handled Liquids: 

SCP type pumps are suitable for clean or slighly contaminated liquids with low viscosity.

Technical Data: 
Suction Flange DN 50 ... DN 300 mm
Discharge Flange DN 32 ... DN 250 mm
Capacity up to 1700 m³/h
Head up to 140 m
Speed up to 2900 rpm
Operating Temperature -20 °C- +175° C
Casing Pressure (Pmax) 16 bar (25 bar*)
Pmax: Suction Pressure+ Shutoff Head

(*)The material of pumps differ according to the type of pumped liquid, operating temperature and pressure. Contact our company for detailed information
Design Features: 
  • Horizontal, single stage, radially split voluts casing type, end suction centrifugal pumps with closed or semi-open impeller.
  • ln addition to 26 basic sizes conforming with EN 22858 I ISO 2858, there are 10 additional sizes. Dimensions of additional sizes may differ from other suppliers.
  • Suction and discharge flanges conforming to ISO 7005/PN16.
  • Due to the back-pull-out design, the complete bearing assembly including impeller and shaft can be dismantled without removing the volute casing from the piping system.
  • All impellers are dynamically balanced according to ISO 1940 class 6.3.
  • Axial thrust is balanced in closed impeller by wear ring I balance hole system and in semi-open impeller by back ribs.
  • Heavy duty shaft not in contact with the medium handled (dry shaft).
  • For casing sealing, confined gaskets are used to prevent blow-out under pressure.
  • Pump shaft Is supported by oil lubricated, long-life, heavy duty rolling bearings. On the coupling side two angular contact ball bearings and on impeller side cylindrical roller bearing or ball bearing Is used.
  • Metal thrower, in addition to oil seals, is used to prevent leakage into the bearings.
  • High capacity oil reservoir decreases oil temperature thus increases bearing life.
  • Cooling chamber in the bearing bracket for oil oooling.
  • Cast Iron bearing bracket provides a solid support for the pump shaft and increases bearing life.
Shaft Seal: 
  • Depending on request or requirement, pumps with soft packing or single, double and cartridge type mechanical seals can be supplied.
  • External seal cooling system may be used if required.
Rotation: 
    Direction of rotation is clockwise viewed from driver end.
Product Designation: 
SCP 125-315
Pump Type SCP
Discharge (DN in mm) 125
Nominal Impeller Diameter (mm) 315
Impeller Type X
Technical Drawings: 
Applications: 
Chemical Industries
Food and Beverage Industries
Heating Cooling Conditioning
Iron and Steel Industries
Oil Industries
Paper and Paper Paste Industries
Power Plants