Handled Liquids: 

SKMV-H Type pumps are suitable for clean or slightly contaminated liquids with low viscosity.

Technical Data: 
Discharge Nozzle Range DN 32 .... DN 150 mm
Capacity up to 400 m3/h
Heads up to 350m
Speed up to 2900 rpm
Operating Temperature -10 °C up to 120°C
Casing Pressure (Pmax)* 30 bar (40 bar*)
(Pmax : The material of pumps differ according to the type of pumped 6quid ,operating temperature and pressure. Contact our company for datailad information).  
Design Features: 
  • Vertical, multistage cenb1fugal pumps with closed Impellers and diffusers.
  • 8 models from DN 32 to DN 150.
  • Suction nozzle flanges are according to ISO 7005-2/ PN 16 and discharge nozzle flanges are according to ISO 7005-2/PN 40.
  • Axial thrust Isbalanced by back wear rfng and balancing holes in each impeller.
  • Pump shaft is coupled with standard motor shaft by means of a flexible coupling.
Shaft Seal: 

Instandard production soft packed stutnng boxes are used. Depending on customer requirement mechanical seals are available.


Direction of rotation is counter clockwise viewed from driver end.

Product Designation: 
Pump type SKMV-H
Discharge Nozzle (DN) 100
Number of Stages 6
Technical Drawings: 
Agricultural İrrigation and Drainage
Building Systems
Chemical Industries
Fire Fighting
Food and Beverage Industries
Heating Cooling Conditioning
Iron and Steel Industries
Oil Industries
Power Plants
Water Supply Treatment and Pressurizing