SNL type pumps are suitable for non-aggressive, non-explosive, clean or slightly contaminated liquids with low viscosity
|Suction Flange||DN 40 up to 200 mm|
|Discharge Nozzle||DN 40 .... DN 200 mm|
|Capacity||up to 500 m³/h|
|Head||up to 95 m|
|Speed||up to 2900 rpm|
|Motor Rating||up to 55 kW +|
|Operating Temperature||-10 °C up to 110 °C|
|Casing Pressure (Pmax)*||16 Bar (Group A and B)*
10 Bar (Group C) *
|(Pmax : Suction Pressure + Shut off Head)
(*) The material of pump differs according to the type of pumped liquid , operating temperature and pressure. Contact our company for detailed information.
- Close-coupled, volute casing, single stage, in-line centrifugal pump with closed impeller.
- Suction and discharge flanges are conforming to EN 1092 - 2 / PN 16
- SNL type pumps are direct coupled with NORM electric motors comply with the VDI standards and IEC frame sizes.
- Due to back pull-out design the motor, motor pedestal, stuffing box cover and impeller can be dismantled without removing the volute casing from the pipe system.
- Axial thrust is balanced by wear ring/balancing holes system.
Single mechanical seal, flushed by pumped liquid, uncooled and unbalanced.
Direction of rotation is clockwise viewed from driver.
|Suction and Discharge Nozzles (DN-mm)||100|
|Nominal Impeller Diameter (mm)||250|
Su Temini Arıtma ve Basınçlandırması
Tarımsal Sulama ve Drenaj
Isıtma Soğutma Havalandırma
Gıda ve İçecek Endüstrisi