Handled Liquids: 

SNM / SNM-V type pumps are suitable for non-aggresive, clean or slightly contaminated liquids with low viscosity.

Technical Data: 
Suction Flange DN 50 ...... DN 200 mm
Discharge Nozzle Range DN 32 ...... DN 150 mm
Capacity up to 500 m³/h
Head up to 95 m
Speed up to 2900 rpm
Motor Rating up to 55 kW +
Operating Temperature -10 °C up to 110 °C
Casing Pressure (Pmax)* 10 bar (16 bar) *
Shaft Sealing Mechanical Seal
(Pmax : Suction Pressure + Shut off Head)

(*) The material of pump differs according to the type of
pumped liquid , operating temperature and pressure.
Contact our company for detailed information.
Design Features: 
  • Close-coupled, volute casing, single stage, end suction centrifugal pump with closed impeller.
  • Main dimensions of casing according to EN 733.
  • Suction and discharge flanges are conforming to ISO 7005-2 / PN16.
  • SNM / SNM -V pumps are direct coupled with NORM electric motors comply with the VDI standards and IEC frame sizes.
  • Due to back pull-out design the motor, seal cover and impeller can be dismantled without removing the volute casing from the pipe system.
  • SNM / SNM -V type close-coupled pumps are lighter and smaller comparing to the norm centrifugal pumps of same hydraulic specifications.
Shaft Seal: 

Single mechanical seal, flushed by pumped liquid, uncooled and unbalanced.


Direction of rotation is clockwise viewed from driver.

Product Designation: 
Pump Type SNM
Suction and Discharge Nozzles (DN-mm) 100
Nominal Impeller Diameter (mm) 250
Technical Drawings: 
Agricultural İrrigation and Drainage
Building Systems
Chemical Industries
Food and Beverage Industries
Heating Cooling Conditioning
Iron and Steel Industries
Oil Industries
Power Plants
Water Supply Treatment and Pressurizing