SNLV-H

Handled Liquids: 

SNLV-H pumps are suitable for clean or slightly contaminated liquids with low viscosity

Technical Data: 
Nozzles DN 40 ..... 250 mm
Capacity up to 800 m³ /h
Head up to 95 m
Operating Temperature -10°C - +140°C*
Casing Pressure (Pmax)* 16 Bar (A and B Group) *
10 Bar (C Group) *
(Pmax : Suction Pressure + Shut off Head)
(*)The material of pump differs according to the type of pumped liquid , operating temperature and pressure. Contact our company for detailed information.
Design Features: 
  • Long coupled, volute casing, single stage, in-line, closed impeller centrifugal pump with own bearing bracket
  • Suction and discharge flanges are conforming to EN 1092 - 2 / PN 16
  • Due to back pull-out design the motor, motor pedestal, stuffing box cover and impeller can be dismantled without removing the volute casing from the pipe system
  • Axial thrust is balanced by wear ring/balancing holes system.
Shaft Seal: 
  • Single mechanical seal, flushed by pumped liquid, uncooled and unbalanced.
Rotation: 
  • Direction of rotation is clockwise viewed from driver.
Product Designation: 
SNLV-H 100-250
Pump Type SNLV-H
Suction and Discharge Nozzle (DN-mm) 100
Nominal İmpeller Diameter (mm) 250
Applications: 
Power Plants
Oil Industries
Water Supply Treatment and Pressurizing
Marine
Chemical Industries
Building Systems
Food and Beverage Industries
Iron and Steel Industries
Heating Cooling Conditioning
Agricultural İrrigation and Drainage